IV2MDM
Mode VISIONS
Made in Japan
Neck Dimensions
Scale : 864mm//34"
Width at NUT (a): 45mm
Width at 24F (b): 74mm
Thickness at 1F (c): 20.5mm
Thickness at 12F (d): 22.5mm
Radius : 305mmR
Controls
When holding the bass in the playing position, the Hexa Mid System switch is located on the control cavity cover on the back of the bass. Moving the switch to the up position activates the "H" or high bank, while the down position selects the "L" or low bank.
The mini switch on the front of the body is a 3-way mid frequency selector. When the Hexa Mid System is set to the H bank, the mid boost peak is at 350Hz in the neck position, 600Hz in the center position, and 1kHz in the bridge position. In the L bank, the mid boost peak is at 250Hz in the neck position, 450Hz in the center position, and 850Hz in the bridge position. Along the lower edge of the body, there are six knobs. Directionally, the first three from the neck towards the lower bout they are; volume, blend and master tone with push/pull EQ bypass switch.
When the master tone knob is pulled up, the EQ bypass is activated. The remaining three smaller knobs near the edge of the body, from the neck towards the lower bout are the treble boost/cut, mid boost/cut, bass boost/cut.
